All 5 fans are plugged into the commander and 5 LED cables into a hub and into LED port 1 on the commander. The strips (which are 4 pin for some reason) are plugged into the second hub and into port 2 on the commander. Now, only the 120 is lighting up (on the one side) and none of the others and neither of the LED strips. 3.7k. Posted April 28, 2020. in HWinfo, when starting it, hit settings and under the Safety tab, disable Corsair and Asetek support. This will prevent HWinfo from conflicting with the Corsair services and it should work fine. (but you won't have any reading of corsair devices within HWinfo). 1. Have a commander pro, open iCue on CoPro tab. 2. Open HWinfo64. 3. 'Performance' tab vanishes, CoPro freezes locking fan speeds where they are (not fun if you have a zero RPM at idle like i do) 4. CoPro does NOT come back online without a full power down of the system - even a restart doesn't recover it. It depends on the fans. Corsair devices, even if resized correctly, have a hardware limit depending on the fans. EX: a lighting node pro maxes out at 204 LEDs per channel, but in reality it can only handle 3 QL fans per channel due to hardware limitations. 1. dewman45. Keyboard: Corsair K55 RGB Mobile/Work Devices: 2020 M1 MacBook Air (work computer) - iPhone 13 Pro Max - Apple Watch S3 Other Misc Devices: iPod Video (Gen 5.5E, 128GB SD card swap, running Rockbox), Nintendo Switch Commander core XT is installed but not showing up in iCue, so I can't control the fans. However my Corsair H100I Elite AIO is plugged into the Commander core and I see it just fine. BIOS is up to date. ICue is up to date. I'm Running an Intel 7 12700 and a ROG STRIX Z690A D4 Motherboard. Literally everything else is Corsair. PSU, Fans, Case etc. Glad to hear that somebody else experience it and may not be hardware issue. Well the first three ports work for me and the last 3 don't (with the brand new hub). With the old hub the first 3 worked correctly, port 4 and 5 gave a very strange rainbow color to the fans and last port was not working at all. And you have the Commander Pro? I have the Commander XT and am also unable to set my LL series Corsair fans to zero RPM mode. However, the 3 case fans included with my iCUE 4000X RBG corsair case I purchased are able to run at zero RPM through the iCUE software. I'm not 100% sure what brand they are, but the model number on them is RWF0051. hhbh3.

corsair commander pro not working